1. Nick Garrod
    10. October 2019 @ 14:54

    Hi Andreas, in the automatic startup script for the DFC77 remote controller, I think there is an error. There is a spurious y after the [Service] header. Thank you for providing the example, as I always need to look these things up. Hardware is more my thing.
    Nick G0OQK


    • admin
      7. November 2019 @ 18:08

      Hi Nick,
      Thank you for your info. Now the “y” should be removed…


  2. Marcus Tarquinio
    14. October 2019 @ 17:36

    Hi Andreas. I been following your youtube channel for a while now. I am a big MicroPython fan and every Sunday I hope that the topic of your video will be on MicroPython. I have some spare devices with the K210 chip. I wonder if are interested I can donate one to the channel.

    Let me know…


    • admin
      7. November 2019 @ 18:02

      Hi Marcus,
      thank you for your offer. I have a few of the K210 modules, but so far did not find time to use them πŸ™


  3. Zsolt
    1. December 2019 @ 8:30

    Dear Andreas,

    Thank you for your DCF77 for ESP32 project! This way with less investment, I’m able to set my radio controlled clocks around the house… At least this is my goal.

    I tried to implement the changes to the DCF77-Transmitter-for-ESP32 what you made on the NTP-time-for-ESP8266-and-ESP32 repository, but I was not successful. The easy part ( very first line, lower case timer.h , credentials.h default comment was easy. ) But with the counter, and getTimeReducedTraffic function I was not able to achieve it.
    Also it seems to be – hope not my ESP32 is faulty – It lost the time once in a while. First it synchronizes with NTP, and suddenly – at the next sync? – it shows invalid date&time ( like if it would try to catch the time via NTP servers but unsuccessful ).

    Can you help with the merging updates from the plain NTP sketch of yours?

    Also, I’d like to recommend to extend the documentation with topics : “array of pulses” , “led and antenna pins 4/5 also the type of the pins (GPIO / pin number) – https://i.imgur.com/pBJgAEK.jpg (my esp32 variant)”

    Hope I was understandable.

    Thank you for your work, time and effort!



    • admin
      5. December 2019 @ 14:51

      I would not change anything. The sketch runs like that. I added the two pins to the readme file.


  4. Dave
    5. December 2019 @ 16:40

    imho the raspberry on is overkill…looks like an esp32 would do fine
    Time could easily be picked up from a GPS or an internet time server.
    Am I over simplifying?


  5. naxxfish
    7. January 2020 @ 10:36

    Hi Andreas,

    Thanks for this and your follow-up video implementing this on the ESP. As a British person, your comment about BST and “you never know what the Brits might do” made me laugh – I for one was quite looking forward to abolishing daylight savings time, as it has been a cause of a lot of (boring) work for me in my career as a broadcast engineer ! But alas it would not surprise me if our government decided to implement an even more obtuse daylight savings scheme – perhaps called Extra British Summer Time – just to “retain our sovereignty” and keep us engineers in work!

    I wonder, though, if you’ve ever considered using GPS to set time rather than NTP ? I can imagine where this could be useful – perhaps for a caravan which may not always have a reliable network connection? Or a remote sensor station ?

    Thanks very much for sharing your experience and wisdom through your videos and I wish you a good 2020!


    • admin
      9. January 2020 @ 16:51

      Using GPS should be rather easy because you get libraries to read the serial data. I assume these libs will also read the time, but I never tried. I have no caravan and in the basement, GPS is very weak πŸ˜‰


  6. Franck
    9. March 2020 @ 8:36

    Good Job.
    I’d like to know if the antenna is the same to receive and transmit.
    Can I buy an antenna ready to be used for you project?


    • admin
      9. March 2020 @ 10:29

      I assume you can use the same antenna. I did two videos about DCF77, and in one of them I showed how I tuned the antenna. I do no more remember in which one.


      • Franck
        21. March 2020 @ 16:21

        Ok thanks for your reply.
        Sad, there’s no schema with ESP32 + antenna to get a global vision how to plug the antenna.
        I assume the antenna is a serie with resistor (500ohms) + Antenna (77.5khz coil) + capacitor .95nF linked to the ground.
        Just to be sure.
        I wondered if two capacitors (One normal + the other variable), was good just to adjust the frequency.


Leave a Reply to admin Close

This site uses Akismet to reduce spam. Learn how your comment data is processed.